|
|
|
|
|
|
|
|
|
|
|
|
|
Deck screws commonly used on or for using to faster deck boards to trailer frames. T30 Torx head Screw size 1/4'' x 1 1/2''.
Specs:
Size : T30 Torx Head 1/4'' x 1 1/2''
Construction: Steel
Finish: steel
Quantity : 1
Part Numbers:
|
Deck screws commonly used on or for using to faster deck boards to trailer frames. T30 Torx head Screw size 1/4'' x 2.5''.
Specs:
Size : T30 Torx Head 1/4'' x 2.5''
Construction: Steel
Finish: steel
Quantity : 1
Part Numbers:
|
Stainless #14 thread x 1" long self tapping screw (3/8 head)
Specs:
Size : 3/8'' Head #14 thread x 1'' long
Construction: Steel
Finish: steel
Quantity : 1
Part Numbers:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Deck screws commonly used on or for using to faster deck boards to trailer frames. T40 Torx head Screw size 5/16'' x 3''.
Specs:
Size : T40 Torx Head 5/16'' x 3''
Construction: Steel
Finish: steel
Quantity : 1
Part Numbers:
|
Steel Winch Bar -Combination Style -Chrome
-Combo design allow you to tighten winches and quickly flip the bar over and release lever style chain binders
-Knurled handle and mushroom tip are designed to prevent the bar from slipping out of your winch or your hands
-Durable steel construction designed for years of use
-Chrome finish provides better corrosion resistance than painted bars
Main Specs:
Construction: Carbon Steel
Finish: Zinc
Overall Length: 39.5"
Diameter : 1.315"
Thickness : 1/4"
Part number : 7004
|
Deck screws commonly used on or for using to faster deck boards to trailer frames. T40 Torx head Screw size 5/16'' x 2.5''.
Specs:
Size : T40 Torx Head 5/16'' x 2.5''
Construction: Steel
Finish: steel
Quantity : 1
Part Numbers:
|
|
|
|
|
|
|
|
|
|
|
|
Steel C-Channel Slide Track - 6 FT. -Raw Finish
-Most common and popular C channel Design in the transportation industry for sliding winches
-Allows you to position your sliding winch where ever you need
-Designed to firmly lock in place when tension is applied for a reliable and smooth tie-down.
-Made in the USA
Main Specs:
Construction: Carbon Steel
Finish: Raw
Overall Length: 72"(6 Ft)
Overall Width : 4-3/4"
Overall Height : 2"
Thickness : 1/4"
Manufacturer: Kinedyne
Part number : 3606
Warranty: Limited Lifetime Warranty
Install : To install , position the Winch Track to the underside of the side rail,which will extend past side rail 1/4 inches to 3/8 inches. Then weld it to the vehicle's side rail with 1/4" fillet welds 2" long every 6" with 1/8" minimum penetration. Finally, weld the winch track to the angle iron,C-channel crossmembers, or shims. It's that simple.
|
|
|
