Home > BRAKE & HUB COMPONENTS >

Titan BrakeRite 1,000 PSI Hydraulic Brake Actuator

Our Price: $1,300.00

Stock Status:(In Stock)

Product Code: 4822500

Qty:

Description

Titan BrakeRite Electric over Hydraulic Brake Actuator for Disc Brake applications.
1,000 psi maximum pressure output for axles equipped with disc or drum brakes.
Compatible with most electronic brake controllers.
Has the most rapid response time in the industry.

Dimensions: 7.19" long x 5.94" wide x 9.09" high
2 oil filler ports.
Uses DOT 3, 4, or 5.1 brake fluid - holds 40 cubic inches (0.7 quarts) of fluid
Note: Do not use DOT 5 Silicone-base fluid
Meets all DOT regulations and complies with CFR-393 federal braking requirements, as opposed to surge brakes
Requires a 5 wire hookup and minimum 12 amp/hour break-away kit
Wiring connections:
- Brown: cold side of breakaway switch; the wire that goes hot when a break occurs
- Black: positive connection on breakaway switch; the wire that charges the breakaway battery
- Blue: output from in-cab controller; the wire that provides power from your brake controller
- Violet: Wired up to breakaway battery
- White: ground
Each unit is bench tested before being sold
Works with Ford and Dodge factory brake controllers
Not compatible with Chevrolet factory brake controllers Note: Can be fixed if you use it in conjunction w/Titan EHB adapter #484600

Share your knowledge of this product. Be the first to write a review »