Home > BRAKE & HUB COMPONENTS >

8,000 lb Dexter Axle Electric Brake Assembly - Left Hand

Alternative Views:

Our Price: $225.00

Stock Status:In Stock

Product Code: B1208E-11

Qty:

Description

Complete left hand ( driver's side) electric brake assembly for 8,000 lb. axles.
Work on Both Dexter and Lippert Brand axles
Simply bolts on to the axle flange with 4 Bolts (not included) and hook up the 2 electrical wires.
These are forward Self-Adjusting brakes -requires no manual adjustment
Works with most standard hub/drum assemblies including Dexter and Lippert(LCI)
Brakes are QAI & CSA certified and pads are fully bonded (no rivets ) for long life and reliability
E-Coated backing plates and zinc plated components provide resist to rust and corrosion
Rear plastic adjuster plugs are included to cover access holes

Main Specs:
Brake Size: 12-1/4" Diameter x 3-3/8" wide
Main Body Construction: Cast Backing Plate
Mounting Position : Left Hand (Driver's side)
Adjust type: Forward Self-Adjusting
Mounting Flange type: 4 bolt
Manufacturer: Axle Teknology LLC.
Part numbers : B1208E-11
Dexter Crossover number : K23-432-00 or 023-432-00
Lippert Crossover number : 298277
Warranty : Limited 1 Year

Axle Technology Quality :

Self-Adjusting Brakes Advantage :
Standard electric brakes require the user to manually adjust the brake shoes out over time. Adjustment is required to provide a consistent and efficient braking performance. Failure to complete this task is felt by weak brakes and a failure in a emergency brake situation. Self-adjusting brakes take the work away by being always properly aligned .This happens while your driving forward thus automatically saving the user time and provides consistent and safer braking experience.

QAI Testing and CSA certification :
These brake assemblies meet and exceed the requirements for Canadian Standards Association (CSA). CSA certification requires a brake to stop a regulated load in a set distance and to be built to industry standards. In addition these brake have also been tested by QAI for braking performance in a complete automotive setup, and under real-world conditions. This provides the most realistic scenarios that the everyday driver will see and to ensure the brake is built with safety and quality in mind.
Automotive-Grade Friction Material :
Axle Technology brought the power of automotive-grade friction material to the trailer brake market.This provides improved stopping power and longevity. The friction material is fully bonded to the surface of the shoe.The lining is custom-molded on the shoe which provides a perfect fit as well as eliminates or reduces the change of cracking and crumbling. In addition tapered edges protect against mechanical lockup ,which can occur when brake shoes are excessively worn or broken.

The friction material is SAE-N certified . SAE-N means the material is environmentally safe and complies with California and Washington regulations. As a result this material not only provides a high-performance braking and stand the test of time.They also are environmentally friendly and safe to use in both the United States and Canada

Share your knowledge of this product. Be the first to write a review »